



Company Details

Borong Machinery Manufacturing CO. LTD [Hebei,China] Business Type:Manufacturer Main Markets: Worldwide Exporter:71% - 80% Certs:ISO9001

Language

Home > News > Adjustment of Rolling Wheel and Refurbishment After Wear

Adjustment of Rolling Wheel and Refurbishment After Wear

2009-05-14

The rolling wheel must be adjusted synchronously, that is, adjusting the indentation of the L and R wheels on the surface of the workpiece to coincide. If the synchronization adjustment is not accurate, it will cause the workpiece to have chaotic teeth, chipping and out-of-tolerance. The center height of the workpiece is consistent with the center height of the rolling wheel (allowable 0.01~0.08mm). The commonly used adjustment methods are:

After the rolling wheel is worn out, the teeth can be ground to reduce the number of teeth. The parameters are calculated again according to the aforementioned process, and the teeth are re-opened to produce a refurbished rolling wheel, which can be refurbished multiple times within the allowable range of the machine center distance.

Previous: Concrete Pump

Next: Principles of Cold Rolling