Borong Machinery Manufacturing CO. LTD

All
  • All
  • Title
HomeProductsConstruction MachinesAutomatic wall render plastering machine

Automatic wall render plastering machine

Payment Type:
T/T,Paypal
Incoterm:
FOB,CFR,CIF,EXW
Min. Order:
1 Set/Sets
Transportation:
Ocean
Port:
Tianjin
Share:
  • Product Description
Overview
Product Attributes

BrandBorong

Warranty Service1 Year

After-sales ServiceOnline Technical Support, Free Spare Parts

Engineering Solution CapabilityOthers

Application ScenarioOther

Design StyleModern

Place Of OriginChina

Power1.5kw

Voltage220v/380v

Efficiency500 square meter/8h

Plastering WayVibration Plastering

Vibrator3 Vibrators

Plastering Height≤5m

Plaster Width/time80cm

Plastering Thickness5-30mm

Perpendicularity DegreeMax 2mm

Console Dimension2.6m*0.3m*0.23m

Supply Ability & Additional Information

PackagingWooden Case

Productivity100 sets per month

TransportationOcean

Place of OriginHeBei of China

Supply Ability100 sets per month

CertificateCE

PortTianjin

Payment TypeT/T,Paypal

IncotermFOB,CFR,CIF,EXW

Packaging & Delivery
Selling Units:
Set/Sets
Package Type:
Wooden Case

Product description

    The powder wall machine of the factory can be completely wiped to the top, one millimeter does not stay, and the dead angle can be applied in place. At the same time, the positioning is fast and the positioning is fast. It takes only about 10 seconds to fix it vertically.


   The machine has the advantages of simple operation, beautiful appearance, stable operation, strong and durable, convenient movement, fast positioning and no need for disassembly, which greatly improves the utilization rate of materials and the progress of the project.


Plastering machine plastering technology

(First) Plastering works:

  In order to ensure the quality of the plastering project and avoid cracks, hollow drums, ash, etc., the following practices and measures are taken:

1. The mortar used in the plastering project should be stirred in strict accordance with the mix ratio.

2. The mix ratio and consistency of the plastering mortar should be used only after passing the inspection. Mortar mixed with cement or gypsum should be controlled to be used before initial setting.

3, in the construction in strict accordance with the normative standards to request and guide the construction: yin and yang angle to find the side, set the standard ribs, layering leveling, dressing, surface calendering.

4. Before the plastering, the brick wall must be watered and wetted in advance.

5. When admixture is used in the mortar, the amount of the admixture should be determined by experiment.


(Second) Plastering of the outer wall of the outer wall:

1. Grassroots cleaning:

Before the exterior wall is smeared with ash, the mortar, wood chips, loose crepe parts, etc. remaining on the surface of the base layer are cleaned and watered.

2. The outer wall reserved hole is filled:

(1) Firstly, the residual mortar, loose lumps, stones, etc. in the reserved hole are chiseled off, and the outer sides are chiseled into the outer eight bell mouths, and washed with water.

(2) Apply a cement slurry with a water-cement ratio of 0.4 to 0.5 in the vicinity of the wall of the cave.

(3) The two side molds fill the dry hard enthalpy of the proper amount of expansion agent and water repellent.

3. The external wall screw hole is filled:

(1) Both sides of the screw hole are chiseled into an outer bell mouth, and the sleeve inside is cut off.

(2) Fill the holes with a 1:2 dry hard cement mortar with an appropriate amount of expansion agent and water repellent plug.

(3) The round steel (outer water sealing tape) of the corresponding diameter is clamped into the PVC casing at both ends by about 5 cm.

(4) Seal the PVC casing shearing surface with waterproof material, and then fill the bell mouth with cement mortar (with appropriate amount of expansion agent and waterproof agent).

4. According to the design requirements, the 10×10 chute should be cut at the junction between the shear wall and the masonry, and the next step can be carried out after filling with the waterproof grease.


Automatic wall render plastering machine


Automatic wall render plastering machine


Automatic wall render plastering machine


Tech Parameter




Efficiency

500 square meter/8h

Power

1.5kw

Voltage

220v/380v

Plastering way

Vibration plastering

Vibrator

3 vibrators

Plastering height

≤5m

Plaster width/time

80cm

Plastering thickness

5-30mm

Perpendicularity degree

Max 2mm

Level degree

Max 2mm

Moves

Automatic Walking

Lifting speed

3.6 m/30s

Host Dimension

1.05m*0.8m*0.8m

Console Dimension

2.6m*0.3m*0.23m

Total Dimension

0.9 cubic mete

As a professional machinery manufacturer, we do have different kinds of construction machinery. Thread Rolling Machine For Sale, contact me if you need it. We will offer you a reasonable Roll Thread Machine Price and best Thread Rolling Services. Besides this Z28-80, we do have Z28-200 Type Thread Rolling Machine, they are both High Speed Thread Rolling MachineAlso we have Steel Straightening Machine, Rebar Bending Hoop Machine, Hydraulic Concrete Converying Transport Pump, and so on. The most important, it can be customized according to various needs.


Product Categories : Construction Machines

Email to this supplier
  • *Subject:
  • *To:
    Mr. Jay zhu
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
HomeProductsConstruction MachinesAutomatic wall render plastering machine
Send Inquiry
*
*

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send