Borong Machinery Manufacturing CO. LTD

All
  • All
  • Title
HomeProductsConstruction MachinesAutomatic Rendering Plastering Machine for Wall

Automatic Rendering Plastering Machine for Wall

Color:
Share:
  • Product Description
Overview
Product Attributes

BrandBorong

After-sales ServiceOnline Technical Support, Free Spare Parts

Application ScenarioOther

Design StyleChinese

Types OfWall Coating

Place Of OriginChina

UseHousehold

Power1.5kw

Voltage220v/380v

Efficiency500 square meter/8h

Plastering WayVibration Plastering

Vibrator3 Vibrators

Plastering Height≤5m

Plaster Width/time80cm

Plastering Thickness5-30mm

Perpendicularity DegreeMax 2mm

Console Dimension2.6m*0.3m*0.23m

Warranty Service1 Year

Supply Ability & Additional Information

PackagingWooden Case

Productivity100 sets per month

TransportationOcean,Land

Place of OriginHeBei of China

Supply Ability100 sets per month

PortTianjin,Qingdao

Payment TypeT/T,Paypal

IncotermFOB,CFR,CIF,EXW

Packaging & Delivery
Selling Units:
Set/Sets
Package Type:
Wooden Case


Product description

 

Our stucco wall machine can be completely wiped to the top without leaving a distance of one millimeter, and the yin and yang angles can be used in the proper position. At the same time, the positioning is fast, the positioning is very fast, and it can be flattened vertically in about 10 seconds. Combining the two departments and traditional management, the problem of slow laser positioning, difficult positioning and large error is solved. The use of a vibrator and the addition of a wiper solves the problem that the artificial applicator wall is prone to hollowing and cracking.

The machine has the advantages of simple operation, beautiful appearance, stable operation, sturdy and durable, convenient movement, rapid positioning and no need for disassembly, which greatly improves the material utilization rate and engineering progress.



Plastering machine plastering technology

(First) Plastering works:

  In order to ensure the quality of the plastering project and avoid cracks, hollow drums, ash, etc., the following practices and measures are taken:

1. The mortar used in the plastering project should be stirred in strict accordance with the mix ratio.

2. The mix ratio and consistency of the plastering mortar should be used only after passing the inspection. Mortar mixed with cement or gypsum should be controlled to be used before initial setting.

3, in the construction in strict accordance with the normative standards to request and guide the construction: yin and yang angle to find the side, set the standard ribs, layering leveling, dressing, surface calendering.

4. Before the plastering, the brick wall must be watered and wetted in advance.

5. When admixture is used in the mortar, the amount of the admixture should be determined by experiment.

6, Plaster with lime paste, drenched with chunks of lime, must be sieved with a sieve with a pore diameter of not more than 3mm × 3mm, and stored in the sedimentation tank. Curing time:  generally not less than 15 days at room temperature, not less than 30 days when used for covering. The lime paste must not contain uncooked granules and other impurities during use.

7. For indoor walls, cylinders and corners of the door, it is advisable to use 1:2.5 cement mortar as the corner guard. The height should not be less than 2m, and the width of each side is not less than 5cm.

8. The pre-embedded line pipe groove of the wall is first filled with 1:2 cement mortar and 3% expansion agent. The reserved hole on the wall is filled with C20砼 with 3% expansion agent. After the wire mesh is nailed, it is plastered. .

 

(Second) Plastering of the outer wall of the outer wall:

1. Grassroots cleaning:

Before the exterior wall is smeared with ash, the mortar, wood chips, loose crepe parts, etc. remaining on the surface of the base layer are cleaned and watered.

2. The outer wall reserved hole is filled:

(1) Firstly, the residual mortar, loose lumps, stones, etc. in the reserved hole are chiseled off, and the outer sides are chiseled into the outer eight bell mouths, and washed with water.

(2) Apply a cement slurry with a water-cement ratio of 0.4 to 0.5 in the vicinity of the wall of the cave.

(3) The two side molds fill the dry hard enthalpy of the proper amount of expansion agent and water repellent.

3. The external wall screw hole is filled:

(1) Both sides of the screw hole are chiseled into an outer bell mouth, and the sleeve inside is cut off.

(2) Fill the holes with a 1:2 dry hard cement mortar with an appropriate amount of expansion agent and water repellent plug.

(3) The round steel (outer water sealing tape) of the corresponding diameter is clamped into the PVC casing at both ends by about 5 cm.

(4) Seal the PVC casing shearing surface with waterproof material, and then fill the bell mouth with cement mortar (with appropriate amount of expansion agent and waterproof agent).

4. According to the design requirements, the 10×10 chute should be cut at the junction between the shear wall and the masonry, and the next step can be carried out after filling with the waterproof grease.

5, the outer wall window frame seam and surrounding practices:

(1) The gap between the door and window frame and the wall should be between 2.0 and 2.5 cm. After the frame is cleaned, the silicone caulking required by the design is used.

(2) The exterior window sill is high and low inside, and the inner window sill is 2cm higher than the outer window sill.




Tech Parameter


Name

rendering machine

Model

CFQ500

Efficiency

500 square meter/8h

Power

1.5kw

Voltage

220v/380v

Plastering way

Vibration plastering

Vibrator

3 vibrators

Plastering height

≤5m

Plaster width/time

80cm

Plastering thickness

5-30mm

Perpendicularity degree

Max 2mm

Level degree

Max 2mm

Moves

Automatic Walking

Lifting speed

3.6 m/30s

Host Dimension

1.05m*0.8m*0.8m

Console Dimension

2.6m*0.3m*0.23m

Total Dimension

0.9 cubic mete






自动墙面抹灰机


自动墙面抹灰机

自动墙面抹灰机


As a professional machinery manufacturer, we do have different kinds of construction machinery. Thread Rolling Machine For Sale, contact me if you need it. We will offer you a reasonable Roll Thread Machine Price and best Thread Rolling Services. Besides this Z28-80, we do have Z28-200 Type Thread Rolling Machine, they are both High Speed Thread Rolling MachineAlso we have Steel Straightening Machine, Rebar Bending Hoop Machine, Hydraulic Concrete Converying Transport Pump, and so on. The most important, it can be customized according to various needs.


Product Categories : Construction Machines

Email to this supplier
  • *Subject:
  • *To:
    Mr. Jay zhu
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
HomeProductsConstruction MachinesAutomatic Rendering Plastering Machine for Wall
Send Inquiry
*
*

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send