{"id":3368,"date":"2026-09-23T10:41:24","date_gmt":"2026-09-23T02:41:24","guid":{"rendered":"http:\/\/www.boronjx.com\/blog\/?p=3368"},"modified":"2026-09-23T10:41:24","modified_gmt":"2026-09-23T02:41:24","slug":"can-acoustic-sound-panels-be-used-in-recording-studios-40ac-406a38","status":"publish","type":"post","link":"http:\/\/www.boronjx.com\/blog\/2026\/09\/23\/can-acoustic-sound-panels-be-used-in-recording-studios-40ac-406a38\/","title":{"rendered":"Can acoustic sound panels be used in recording studios?"},"content":{"rendered":"

If you\u2019ve ever stepped into a professional recording studio\u2014whether for a podcast, a band\u2019s album session, or a voiceover for a commercial\u2014you might not notice all the tiny, unassuming panels lining the walls and ceiling at first glance. But ask any engineer or producer, and they\u2019ll tell you those acoustic sound panels are non-negotiable. As a long-time supplier of these panels, I\u2019ve spent years working with studios of all sizes, from home setups in garage basements to multi-room commercial facilities, and one question comes up more than any other: Can acoustic sound panels actually be used in recording studios?<\/em> Acoustic Sound Panels<\/a><\/p>\n

<\/p>\n

The short answer is a resounding yes\u2014but there\u2019s a lot more nuance to it than just slapping some panels on a wall and hitting record. Over the years, I\u2019ve seen new studio owners skip the research, buy cheap off-the-shelf foam panels from a big-box store, and end up with recordings that sound muddy, echoey, or full of harsh, unbalanced frequencies. That\u2019s a waste of time and money, which is why I want to break down how acoustic panels work in a recording studio, why they\u2019re essential, and how to use them correctly to get the professional sound you\u2019re after.<\/p>\n

First, let\u2019s get clear on what acoustic sound panels do. Sound is a mechanical wave that travels through air, bouncing off hard surfaces like concrete, drywall, and glass. In a room with no treatment, when you make a sound\u2014sing into a mic, play a guitar, speak a line\u2014that sound wave bounces around multiple times before dying out. That echo, or \u201creverb,\u201d might feel natural in a living room, but it\u2019s a disaster for recording. If a track has too much unwanted reverb, engineers can\u2019t separate the source sound (your voice, the guitar) from the room\u2019s reflections, leading to mixes that sound muffled, distant, or just plain unpolished.<\/p>\n

Acoustic panels absorb those unwanted sound waves. Unlike insulation, which traps heat, panels are designed to target specific frequency ranges. For recording studios, we typically supply panels that handle mid and high frequencies\u2014the ones that cause the most harshness, clarity issues, and echo. High frequencies, like the crack of a snare or the sibilance in a voice, are short wavelengths that are easy for panels to catch, while mid frequencies, which carry most of a recording\u2019s warmth and clarity, are the sweet spot where panels make the biggest difference. Low frequencies, like the boom of a kick drum, are longer wavelengths, so they need thicker bass traps (a type of specialized panel we also supply) placed in corners\u2014where low-frequency sound tends to build up.<\/p>\n

I\u2019ve seen this firsthand with a small band that reached out to me two years ago. They had a home studio in a 12×16 foot basement room, and every time they recorded, their lead vocal sounded like it was coming through a tin can. They\u2019d bought a few cheap foam panels online, stuck them on the back wall, and wondered why nothing was changing. When I visited their space, it was clear: they\u2019d treated the wrong surfaces, and their corner bass traps were nowhere to be found. We worked together to map their room\u2019s \u201chot spots\u201d where reverb was worst\u2014like the front wall behind the mic, and the ceiling above the drum kit\u2014and installed our standard mid-high absorption panels there, plus thick bass traps in all four corners. The difference was immediate. Their vocal tracks went from sounding echoey and muted to crisp and present, and their drum tracks had the tight, punchy sound that won them their first indie label spot. That\u2019s the kind of result that makes my job worth it.<\/p>\n

But here\u2019s the thing: not all acoustic panels are created equal. When I first started supplying these products, I sold a few generic foam panels to a studio owner who only cared about low price, and he came back a month later complaining that they \u201cdidn\u2019t work.\u201d The issue? Generic foam is designed for small, casual spaces\u2014like home theaters or offices, not precise recording studios. High-quality acoustic panels use dense, rated absorption materials, like fiberglass or mineral wool, with a fabric cover that won\u2019t interfere with sound absorption. Cheaper foam, on the other hand, only absorbs a small range of mid-high frequencies, and often breaks down over time when exposed to humidity or temperature changes in a studio (especially basements or uninsulated rooms). That\u2019s why we test every panel we supply for NRC (Noise Reduction Coefficient)\u2014a standard rating that tells you exactly how much sound a panel absorbs, on a scale from 0 to 1. For recording studios, we recommend panels with an NRC of 0.7 or higher, because that means they absorb 70% or more of the sound that hits them, which is exactly what you need to cut unwanted reverb.<\/p>\n

Another common misconception is that you need to cover every wall in a studio with panels. That\u2019s not true at all\u2014 in fact, over-treating a room can make recordings sound \u201cdead,\u201d like they\u2019re missing the natural warmth that makes vocals and instruments feel real. The goal is balance: you want to eliminate the unwanted reverb that muddles your track, but keep enough of the natural room sound to give your recordings depth. That\u2019s why we work with studio owners to create a treatment plan tailored to their space, not a one-size-f-all order. For example, a vocal booth is a small, enclosed space, so you might only need panels on the front wall (directly in front of the mic to reduce front-to-back reflection) and a few on the side walls to cut side echo. A larger room for band tracking might need panels on the walls behind the performers, plus bass traps in corners, and only a few panels on the ceiling to avoid making the space feel too flat.<\/p>\n

I also want to mention where acoustic panels shouldn\u2019t be used, because that\u2019s another mistake I see all the time. A lot of new studio owners put panels on the walls that face the mic, which is the exact opposite of what you should do. Those walls send sound waves directly back to the mic, causing \u201ccomb filtering\u201d\u2014that weird, thin, hollow sound that makes vocals or guitars sound off. Instead, the wall behind<\/em> the mic (called the first reflection point) is where you want panels, because that\u2019s where the sound bounces off and causes the most echo. You don\u2019t need panels on walls that are far from the mic, or on surfaces that reflect sound intentionally\u2014like a \u201cdiffuser,\u201d which is a panel that scatters sound instead of absorbing it, used to add subtle depth in larger spaces.<\/p>\n

Over the past five years, I\u2019ve worked with everything from bedroom home studios with 100 square feet of space to commercial studios tracking major label artists, and the core need is the same: acoustic panels make a recording studio functional. Without them, even the most expensive mic or mixing console will sound bad, because the room itself is ruining the sound. I once had a producer tell me he spent $10,000 on a new mic, but when he recorded a vocal, it sounded exactly like his old $1,000 mic. When he fixed his room with our panels, he got the sound he paid for. That\u2019s the value of quality acoustic treatment.<\/p>\n

If you\u2019re setting up a new recording studio, or upgrading an old one, choosing the right panels is the biggest investment you can make in your sound. Generic products won\u2019t cut it\u2014you need panels that are tested, rated, and designed specifically for the unique needs of a recording space. At my company, we don\u2019t just sell panels\u2014we work with you to figure out how many you need, where to place them, and what type works best for your room size and budget. We\u2019ve helped hundreds of studios, from solo podcasters to full band tracking rooms, get the professional sound they need without breaking the bank.<\/p>\n

<\/p>\n

If you\u2019re ready to take your recordings to the next level, don\u2019t settle for cheap, untested panels that won\u2019t deliver results. We\u2019d be happy to walk through your space with you, answer any questions you have, and help you build a treatment plan that fits your needs. Contact us today to discuss your acoustic sound panel needs and get started on creating a studio that sounds as good as you want your recordings to be.<\/p>\n

Felt Acoustic Panel<\/a> References
\nBeranek, L. L. (1986). Acoustics: Sound Fields and Transducers (2nd ed.). American Institute of Physics.
\nEverest, F. A. (2000). The Master Handbook of Acoustics (4th ed.). McGraw-Hill.
\nNational Sound and Vibration Laboratory. (2018). Acoustic Absorption Panel Performance Standards for Recording Facilities.
\nOlsen, S. O. (2015). Room Acoustics for Recording Studios: A Practical Guide. Focal Press.<\/p>\n

\n

Suzhou Trano New Material Technology Co., Ltd.<\/a>
As one of the most professional acoustic sound panels manufacturers and suppliers in China, we also support customized service. Please feel free to buy bulk high quality acoustic sound panels for sale here from our factory. For price consultation, contact us.
Address: SuZhou
E-mail: info@trano-tech.com
WebSite: https:\/\/www.tranofelt.com\/<\/a><\/p>\n","protected":false},"excerpt":{"rendered":"

If you\u2019ve ever stepped into a professional recording studio\u2014whether for a podcast, a band\u2019s album session, … Can acoustic sound panels be used in recording studios?<\/span>Read more<\/a><\/p>\n","protected":false},"author":160,"featured_media":3368,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1],"tags":[3331],"class_list":["post-3368","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-industry","tag-acoustic-sound-panels-4b4d-40c0f4"],"_links":{"self":[{"href":"http:\/\/www.boronjx.com\/blog\/wp-json\/wp\/v2\/posts\/3368","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/www.boronjx.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/www.boronjx.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/www.boronjx.com\/blog\/wp-json\/wp\/v2\/users\/160"}],"replies":[{"embeddable":true,"href":"http:\/\/www.boronjx.com\/blog\/wp-json\/wp\/v2\/comments?post=3368"}],"version-history":[{"count":0,"href":"http:\/\/www.boronjx.com\/blog\/wp-json\/wp\/v2\/posts\/3368\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"http:\/\/www.boronjx.com\/blog\/wp-json\/wp\/v2\/posts\/3368"}],"wp:attachment":[{"href":"http:\/\/www.boronjx.com\/blog\/wp-json\/wp\/v2\/media?parent=3368"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/www.boronjx.com\/blog\/wp-json\/wp\/v2\/categories?post=3368"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/www.boronjx.com\/blog\/wp-json\/wp\/v2\/tags?post=3368"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}